昆山达亮塑胶模具北京赛车

Service phone:13962423309

Contact us

Bai Shui Chao           

Email: dl-bsc@dlsjmj.com 

Telephone:  13962423309 


Bai Zhi Yong            

Email: dl-bzy@dlsjmj.com 

Telephone:13862612066


Mark Yen              
Email: dl-mark@dlsjmj.com 
Telephone:  17312472090 


TEL:0512-57170368

FAX:0512-57170328

HTTP://www。ksdaliang。com

Add: No.218 South Yucheng  Road Kunshan City Jiangsu Province China.


News Location:Index  >  News

  1. 18 basic knowledge of injection moldRelease date:2020-07-03 Click number:877

    01 nozzle The melt usually flows from the nozzle into the nozzle, but in some molds, the nozzle is part of the mold because it extends to the bottom of the mold. In addition, there are two main types of nozzles: open and closed nozzles. In injection

  2. On the difference between silicone mold and plastic moldRelease date:2020-07-03 Click number:985

    Material differences: Silica gel mold is a special mold adhesive for making handicrafts. Generally, silica gel and curing agent are mixed according to a certain proportion, and then cured at room temperature or heated conditions. It has the characte

  3. What are the five links of injection mold?Release date:2020-06-18 Click number:880

    First, effective management of product data management, process data management, drawing document management: effective mold product data management, process data management, drawing document management, can ensure the comprehensiveness of the file,

  4. What are the plastic mold structures?Release date:2020-06-18 Click number:956

    The plastic mold structure mainly includes a die with variable cavity composed of a die combination base plate, a die assembly and a die combination card plate, and a die with variable core composed of a die combination base plate, a die assembly, a

  5. Key points for new mold test of plastic moldRelease date:2020-06-12 Click number:991

    1. Mold test steps and actions A. Before mold test, check whether the mold is assembled and whether the raw materials are dried B. Before mold change, spray antirust agent into the mold during production, change the mold, return it and fill in the r

  6. What are the requirements of injection mold design?Release date:2020-06-01 Click number:1453

    1. Analyze the structure and technical requirements of plastic parts. The structure of the plastic part determines the complexity of the injection mold structure, and the technical requirements of the plastic part (dimensional accuracy, surface roug

Message

昆山达亮塑胶模具北京赛车

13962423309

上海快3开奖 秒速赛车官网投注 北京赛车PK10历史开奖 北京赛车历史开奖直播 秒速赛车 天津11选5 北京赛车历史开奖直播 北京赛车直播视频 秒速赛车平台 北京赛车PK10历史开奖